Getting error when activating XMLTRaceStdOut value equals 1 in java environment in user configurati

Unknown

On changing the value of XMLTRaceStdOut in configuration file from 0 to 1 the application crashes.

<XmlTraceToStdout value="1"/>

Something like below error print on console

Thank-you!

pimchaya.wongrukun01

Hello @MayassK

This is not the error but it is field id(FID) 935 definition in a dictionary response received from the server where EMA requests dictionary from(default behavior). I also got the same message as you.

Dictionary request sent from EMA(Outgoing Reactor message)

<!-- Outgoing Reactor message -->
...
<REQUEST domainType="DICTIONARY" streamId="3" containerType="NO_DATA" flags="0x06 (HAS_PRIORITY|STREAMING)" priorityClass="1" priorityCount="1" dataSize="0">
    <key flags="0x0B (HAS_SERVICE_ID|HAS_NAME|HAS_FILTER)" serviceId="4515" name="RWFFld" filter="7"/>
    <dataBody>
    </dataBody>
</REQUEST>

Dictionary response received from the server(Incoming Reactor message)

<!-- Incoming Reactor message -->
...
<REFRESH domainType="DICTIONARY" streamId="3" containerType="SERIES" flags="0x168 (HAS_MSG_KEY|SOLICITED|REFRESH_COMPLETE|CLEAR_CACHE)" groupId="0" State: Open/Ok/None - text: "" dataSize="616032">
    <key flags="0x0B (HAS_SERVICE_ID|HAS_NAME|HAS_FILTER)" serviceId="4515" name="RWFFld" filter="7"/>
    <dataBody>
        ...
     
<seriesEntry>
                <elementList flags="0x02 (HAS_SET_DATA)">
                    <elementEntry name="NAME" dataType="ASCII_STRING" data="SLOT_AAFLG"/>
                    <elementEntry name="FID" dataType="INT" data="935"/>
                    <elementEntry name="RIPPLETO" dataType="INT" data="0"/>
                    <elementEntry name="TYPE" dataType="INT" data="5"/>
                    <elementEntry name="LENGTH" dataType="UINT" data="1"/>
                    <elementEntry name="RWFTYPE" dataType="UINT" data="19"/>
                    <elementEntry name="RWFLEN" dataType="UINT" data="1"/>
                    <elementEntry name="ENUMLENGTH" dataType="UINT" data="0"/>
                    <elementEntry name="LONGNAME" dataType="ASCII_STRING" data="SLOT AAFLG"/>
                </elementList>
            </seriesEntry>
...

If EMA requests data successfully, you will see the following messages:

Data requests example message:

<!-- Outgoing Reactor message -->
...
<REQUEST domainType="MARKET_PRICE" streamId="5" containerType="NO_DATA" flags="0x46 (HAS_PRIORITY|STREAMING|HAS_QOS)" Qos: Realtime/TickByTick/Static - timeInfo: 0 - rateInfo: 0 priorityClass="1" priorityCount="1" dataSize="0">
    <key flags="0x03 (HAS_SERVICE_ID|HAS_NAME)" serviceId="4515" name="PTT.BK"/>
    <dataBody>
    </dataBody>
</REQUEST>

Data Response example message:

<!-- Incoming Reactor message -->
...
<REFRESH domainType="MARKET_PRICE" streamId="5" containerType="FIELD_LIST" flags="0x1FA (HAS_PERM_DATA|HAS_MSG_KEY|HAS_SEQ_NUM|SOLICITED|REFRESH_COMPLETE|HAS_QOS|CLEAR_CACHE)" groupId="1" seqNum="55232" permData="0311 A367 61C0" Qos: Realtime/TickByTick/Static - timeInfo: 0 - rateInfo: 0 State: Open/Ok/None - text: "All is well" dataSize="1385">
    <key flags="0x07 (HAS_SERVICE_ID|HAS_NAME|HAS_NAME_TYPE)" serviceId="4515" name="PTT.BK" nameType="1"/>
    <dataBody>
        <fieldList flags="0x09 (HAS_FIELD_LIST_INFO|HAS_STANDARD_DATA)" fieldListNum="2" dictionaryId="1">
            <fieldEntry fieldId="1" data="1A69"/>
            <fieldEntry fieldId="2" data="8E"/>
            <fieldEntry fieldId="3" data="5054 54"/>
        ...

umer.nalla

Hi @MayassK

If you wish to capture / redirect the XMLTrace to a file please see the following post on redirecting to a file:

How to enable tracing incoming/outgoing messages EMA Java receives/sends

Unknown

Thank you Pimchaya.Wongrukun,

Is there any way to see server logs in application?

As mentioned in tutorial XMLTraceOut is used to see the logs but i am getting above response and after this response i am not able to execute the batch.

Thanks for your help!

pimchaya.wongrukun01

Hello @MayassK

There is no way to see server logs in the application. To send batch request, please try example370__MarketPrice__Batch.