-
Is there a way to get updateRate value per User and not per mount via RestAPI
Is there a way to get updateRate value per User and not per mount via RestAPI ? Currently it is possible to get updateRate from RestAPI using URL like this: http://ADS_IPADDRESS:RESTAPI_PORT/sharedmem/classes/SinkDistMsgs/instances/all/variables/updateRate Result is like this :…
-
RTDS Rest API how to get update rate from ADS per user not per mount
Hi Team Is there a way to get updateRate value per User and not per mount via RestAPI ? Currently it is possible to get updateRate from RestAPI using URL like this: http://ADS_IPADDRESS:RESTAPI_PORT/sharedmem/classes/SinkDistMsgs/instances/all/variables/updateRate Result is like this :…
-
Python WebSocket Code on RTO - Would it work on RTMDS over WebSocket
We have a client that is currently using Python API to connect to RTO on AWS and generating json files as output for real-time data. They are now evaluating to move the workflow from AWS to on prem RTMDS setup where they have access to 2 ADS servers over private comms. The RTMDS setup is WebSocket enabled. Client wants…
-
F9: Server has gone down. Will recall when a server becomes available
We have are getting data from IDN_SELECTFEED and we have created a conflation service based from IDN_SELECTFEED called IDN_X and we have 4 ROUTES to retrieve data from IDN_SELECTFEED When RTO Route is disconnected IDN_SELECTFEED is able to seamlessly get data from other RTO Routes. However, for IDN_X it will occur: F9:…
-
HTTPS for RTDS Rest API
Does the current REST Interface for RTDS components support https? In the documentation, for example in REFINITIV REAL-TIME CONNECTOR SYSTEM ADMINISTRATION MANUAL, the REST Interface only shows http. Does it support any authentication? Thank you.
-
ADS service name
Hello, We had an incident with a client recently about an ADS service name. And we have now a question : what are all possible values for a service name ? Is there some special characters allowed ? Basically what is the technical type that is used to store the service name ? Thanks,
-
inconsistent behavior of ADS while using websockets and service is currently down (A17)
Hi (copy of support case 13470008). While using ads3.7.2.L1.linux.rrg 64-bit under RHEL7.9, I observed an inconsistent behavior. While requesting to stream 200 symbols (using websockets) onto a service currently down on ADS , I am receiving the following (expected) status message from the server. The problem is that a…
-
ads shared memory /python
Hi - is there a way to interrogate ads shared memory (similar to the adsmon -PRINT function) with python?
-
How do grant and deployed_platform_username work in platform.Definition
I am having issues creating a session using the Python API. We have a local ADS and DACS. deployed_platform_host is the ADS address and I have put a valid DACS user in deployed_platform_username. For grant I am using GrantPassword with my Eikon username and password. I suspect this is wrong but I don't have any other users…
-
Refinitiv Robust Foundation API Client Load Balancing with RTC
Hi, Is it possible to Refinitiv Robust Foundation API Client Load Balancing with RTC? I set following option in configuration but it doesn't seem to do anything according to logs: *rtc*enableConnectConfig : True I'm using refinitivrealtime/rtc:3.5.3.L1 docker image
-
ADH/ADS : Item not found in cache when posting data using Non interactive provider
Hello, We are trying to use NIProvider to publish custom items on ADH using a dedicated service name. It seems to work but we are not able to consume the data from ADS using the same service name. On RTC when checking the item on ADS we get the error : Stream State : Closed Data State : Suspect State Code : None Status…
-
ADH Cache MBO
I am testing MBO behavior when ADH/ADS is set up in caching. I am sending a query for MBO RIC and get a response back with Summary Data and the Orderbook multi part solicited refresh message. While keeping the subscription on, I query the same RIC via the ADH and expectedly ADH responds back but this time I just see the…
-
ETA RWF encoding
Hi, We try to retrieve streaming realtime data via ETA C in RWF format from our local deployed RTDS. There is a sample code for using ETA C VAConsumer what we used: ./VAConsumer -webSocket { {HOST}}:{ {PORT}} { {SERVICE}} mp:EUR= -uname { {USER_NAME}} -aid { {APPID}} -x -protocolList rssl.rwf We received the following…
-
HELM chart or YAML file for support with cloud
Hi, Asking here based on Refinitiv Helpdesk's suggestion. I am looking at running RTC in the cloud. I have the cloud architecture guide document but it contains no details on how to configure the suggested cloud layout through Kubernetes. Is there a HELM chart or YAML file for support with cloud ? regards Graham
-
Murex connection to RTMDS
Hi all, We have a murex client currently subscribing to real-time data via RTDS. The site is now migrating from RTDS to RTMDS and murex is not able to get real-time data from RTMDS ADS. Log file is attached for reference. RTDS setup DACS name - murex service name - IDN_RDF Port - 14002 ADS - 172.x.x.x (Local ADS IP) RTMDS…
-
RFA Requests returning status "*All is well". What is the meaning of the appended asterisk?
Hello, I am using RFA 8.2.2.L1, c++ Linux. When making requests for market price the status will be returned as "*All is well". What is the meaning of the * character appended to the beginning. Before updating from RFA 8.1.0.L1 the status would be just "All is well".
-
RTC DOCKER repository access
Hi Trying to build the docker container for RTC. Having trouble with the first step - access to the repository. We cannot access the repository at registry.access.redhat.com/ubi8/ubi or any other repository that are the other side of the firewall. So to solve this we copied the RTC image into our internal repository.…
-
Websocket settings ADH/ADS
Advanced Data Hub (ADH) Advanced Distribution Server (ADS) Question 1, in order to support websocket settings, do the following settings need to be modified in adh/ads at the same time? *IDN_SELECTFEED*convertMfeedDataToRWF : True *IDN_SELECTFEED*dataType : 6 Question 2, Does ET support obtaining RWF type data from ADS?
-
Remove ADS Cache
i am using ads pop configuration for our system. How do i remove cache ADS (downstream connectivity to ads), so every time downstream is subscribing a RIC, it will get a new image.
-
Python RDL - error message general aid
Good day, We recently developed a very simple Python+RDL script which aims to instantiate a custom config file to be populated with details of connectivity such as: -dacs user & -ads server We do some RIC consultation through: rd.content.pricing.Definition We are able to take user input for number of updates, RICs and…
-
How to connect to a specific deployed RTDS service using Pyhon RDL?
How to connect to a specific deployed RTDS service using Pyhon RDL? I've been able to successfully hand over on-premise server IPs, dacs users and subscribe as snapshot or stream to RICs and specific fields. I was wondering if it was possible to open_session and/or get_data, etc to a specific service within our RTDS ADH…
-
User Interface for ADH and ADS
Is there a User Interface for ADH and ADS? Or any github link that may have attempted to create it? I want to implement the ADH/ADS interface control via UI.
-
ads process crashed.
my ads pop process crashed couple of times in a week. As per the var/log/messages it says, Jun 25 11:28:18 <Host_Name> kernel: ads[230118]: segfault at 8 ip 0000000000d87962 sp 00007fff712cb790 error 6 in ads[400000+feb000] Jun 25 11:28:18 <Host_Name> abrt-hook-ccpp: Process 230118 (ads) of user 1001 killed by SIGSEGV -…
-
ADS/TREP timestamps
Hi, I am planning to capture different time stamps on ADS/TREP Eikon C++ API Exchange->Refinitiv sent time -> TREP (receive/sent) -> ... I can see there are fields that provide exchange timestamps. Is there a way to get a time stamp when the message left Refintiv server? If not, is there a way to capture at least TREP…
-
Murex unable to connect to ADS using WelbSocket
Our client is trying to set up Murex to connect to ADS using WebSocket (port 15000). Although they are able to telnet on the port to the ADS, Murex shows an error as attached. murex_14Apr.pngmurex_telnet 14April.pngUpdated Log.zip
-
OPINT_1 missing for WRNT_TYPE
HI , Open interest (OPINT_1) is missing for Warrant when querying ADS using webservice .Please let me know if there is any alternative filed or how to get Open interest for warrant Here is the request and response message for reference . SENT: { "ID": 2, "Key": { "Name": [ "15311.HK" ], "Service": "IDN_SELECTFEED" },…
-
Running ADSPOPs in Kubernetes
Hi, Do you have example code/project on how I can run ADSPOPs in kubernetes? Thank you
-
Post / receive Acks on the same channel for ADS websocket in Python
Hi - I can connected to an ads and off-stream post successfully. Im trying to send a lot of data, so i use a while True loop after receiving the login response to listen to a queue and post. However this means that the on_message function is never accessed to receive the Acks to the posts. Do you have any example of how I…
-
How to configure EMAConfiguration.xml to connect to several ADS Pool ?
Hello Comparing RFA and EMA, we interpret EMA config management via EMAConfig.xml is not as flexible as RFA. From configuration file perspective, with RFA specifying one Session it is possible to connect to several Connections (not only resiliency pair, but several ADS group or silos), each connection / ADS pool providing…
-
RTDS REST API
Hi, Please can you confirm where we can access the RTDS REST API documentation? We are struggling to find any documentation related to this (apart from a YouTube video https://www.youtube.com/watch?v=p2gm3qQDgIc) – having checked the client portal, the academy and the developer area, we simply are unable to find the guide.…
-
No servers available that support this QoS.
I have an ads service which is cascaded from another ADS. I am getting below error while running an rmdstestclient subscription test. Apparently the clients are also not able to get the data while connecting to this ads. Why is this error occurring? Cascading License is enabled on all the POPs. Stale Status Received.…
-
MUREX : Our IDN_RDF service can not be started anymore
Hello Since this morning our IDN_RDF service is not starting anymore. With the adhmon tools we can see the below : The status remains to "Recovering". For information, the infra is installed on our local machine. Is it expected ? How can we set up again to active status ? Thanks,
-
Websocket "ERROR:websocket:close status: 1001"
Hello Team, We have upgraded contribution service from ATS version 1.6.6 to ATS 1.6.8.E1 and since then we have started noticing websocket error message while invoking the close method - "ERROR:websocket:close status: 1001". Though this not impacting but on closing websocket we get the above error. Just wanted to…
-
Consumer App using EMA - Timeouts
I have a EMA based data consumer (snapshot) application that sends batch requests (1000 instruments in each batch) to the managed elektron feed in EaaS data center... and in return , some of the requests return status of closed/suspect/timeout : 2022-09-02 13:30:41,302 [main] WARN : Request failed: service=IDN_RDF…
-
IDS vs ADS number format for some rics
When calling RIC AULZ2 in the IDS restful interface I get back results like: "TRDPRC_1": "144 10/32", "ASK": "144 11/32", "BID": "144 9/32", "PRIMACT_1": "144 10/32" When calling though our ADS service I get back results like: "TRDPRC_1": "144.09375", "ASK": "144.125", "BID": "144.09375", "PRIMACT_1": "144.09375" Most RICS…
-
Is it possible in TREP to ignore whole update if it contains a particular value
Is it possible in TREP to ignore whole update if it contains a particular value? Eg: if FID 23 contains the value 'BBG' then ignore the whole update, ie, ignore all the 8 fids in that update
-
How to specify two services in the ADS testclient/testserver (from infra tools package) ?
Hi, I would like to use the testclient/testserver to record and playback data to performance test an application. Quick Start Guide to Recording and Playback of Refinitiv Real-Time Data | Refinitiv Developers I got it working for one service. However our application consumes data from two services configured in the ADS. I…
-
Service Group request routing for Interactive Providers
Hi, We have a following deployment - several interactive providers , S1..SN, grouped into a service group SG. Items are exclusive per provider and every provider also supports requests in Symbol List domain. Unfortunately, every time an item is requested from SG via ADS, it fans out requests to every member of the group…
-
Congestion on ADS. How to diagnose and prevent reoccurrence of issue
Hi - can you comment on the congestion we see on our system this afternoon. How can we diagnose the root cause? can we use rrdump (or any other tool) to diagnose this, after the event? ADS1 log <rmds.1.ads.3.itemThread: Notice: Tue Jul 19 15:12:57 2022> Suspended requests due to transport congestion.<END>…
-
Is there a "sandbox" ADS/ADH installation package available?
Is there any way of setting up a "sandbox" ADS/ADH to verify whether they have the functionality I need? I'm looking at a possibility of using ADS (and possibly ADH in the future for better load balancing) in my company to replace legacy system. Before I start an "official" process of proposing an architectural change and…